Bryant evolution thermostat : User Manual (2024)

ManualsBrandsBryant ManualsControl panelevolution thermostat


Bryant evolution thermostat : User Manual (11)




Zone Control Homeowner’s Guide

Summary of content (44 pages)

Bryant evolution thermostat : User Manual (2024)


How do you reset the Bryant Evolution Connex thermostat? ›

Step 1: Open the keypad door. Step 2: Simultaneously press and hold the up and down buttons on the right side of your keypad for five minutes.

Why is my Bryant thermostat not working? ›

Check to make sure that your thermostat is set in the "cool" position. Ensure that your outdoor air conditioning (condensing unit) is running. Check the circuit breakers in the circuit breaker box (or electrical panel), most likely mounted to an outside wall in the back of the house.

How do you control a Bryant thermostat? ›

Monitor and control your thermostat from your smartphone. With the Bryant® Wi-Fi® Thermostat app, you can remotely adjust the temperature, schedule an event, and receive alerts about the system. The app is available for iOS or Android devices.

What is the hold button on a Bryant thermostat? ›

The “HOLD” button will lock your current programmed settings and keep your thermostat at the temperature you've keyed in. Whatever your preferred settings are, keep in mind that your thermostat is more efficient when you increase the temperature instead of completely shutting down the air conditioning system.

What is a bryant evolution system? ›

The Evolution system is an advanced communicating system, capable of delivering high-efficiency performance and total home comfort in both warm and cold conditions. With an Evolution system, you have more control of temperature, humidity, indoor air quality, fan speed and ventilation in your home.

How to reset a thermostat? ›

There is usually a small reset button somewhere on the thermostat. Finding this button may require that the thermostat panel be removed and pressing this button may require something like a paperclip to push. Hold the reset button down for 5 seconds and the thermostat should reset.

How do I reset my thermostat controller? ›

Make sure the breaker is flipped all the way 'off,' then wait for 30-seconds. Turn the breaker back 'on. ' Return to the thermostat control panel and flip the thermostat back into the 'on' position. Finally, set the mode (heat/cool) and the temperature paying careful attention to the flow of conditioned air.

Is there a reset button on a Bryant AC unit? ›

Bryant air conditioners are no different. However, unlike other companies that manufacture air conditioners, the brand doesn't have a reset button on the air conditioner. You have to reset the device by resetting the circuit breaker in your house.

What thermostat is compatible with Bryant? ›

ecobee Smart Thermostats powered by Bryant

The ecobee Smart Thermostats, Powered by Bryant, can tailor themselves to your schedule, your personal comfort preferences and the weather outside. They can also provide details on savings each month and insight into your heating and cooling equipment performance.

How do I fix an unresponsive thermostat? ›

Try checking the circuit breaker box or replacing the batteries. Bad wiring: The thermostat may be unresponsive if the wiring has gone bad. Remove the cover and check inside for loose, detached, or corroded wires. If you spot any problems, contact an HVAC technician for assistance.

How to unlock a Bryant thermostat? ›

Resetting Your Thermostat

Based on different models, the instructions might vary slightly, but it is almost the same. The Following Are The Steps To Unlock Your Keypad: Step 1: Open the keypad door. Step 2: Simultaneously press and hold the up and down buttons on the right side of your keypad for five minutes.

Why is my AC not responding to the thermostat? ›

What could be the problem if the HVAC is not responding to the thermostat? You have bad control wiring, a bad thermostat, a bad 24v transformer, or there is no power to the transformer.

How do I calibrate my thermostat temperature? ›

First, remove the control unit from the wall mounting and then locate the screw in the back. Turning it back and forth opens the contacts. Once you feel the setting is correct, turn the calibration screw again to close the contacts. The thermostat is now reset.

How do I change the mode on my thermostat? ›

Depending on your model of thermostat, you will likely either have a small switch on the thermostat's faceplate or a cycle button to cycle between heating, cooling, and off options. You can prep the system to cool the home by moving the switch or pressing the button until you reach the “cool” setting.